srm7500atilibusb
General
Philips SRM-7500 RF configuration for use with the srm7500libusb driver
The remote and the dongle communicate with each other over ieee 802.15.4
a few extra network parameters are needed (via lircd's --device option).
lircd --driver=srm7500libusb lircd.conf.srm7500libusb \
--device=macShortAddress=12:34,remoteShortAddress=56:78,macPANId=9a:bc
Mandatory parameters
macShortAddress
802.15.4 short address (2 byte hex)
to be assigned to the receiver
remoteShortAddress
802.15.4 short address (2 byte hex)
to be assigned to the remote
macPANId
802.15.4 numeric network id (2 byte hex)
Optional parameters
remoteExtendedAddress
802.15.4 extended address (8 byte hex)
of the remote. when given, ignores all other
802.15.4 rf communication. lircd writes your
remotes address to the logs when pairing.
macBeaconPayload
802.15.4 network name (ASCII string)
defaults to PHILIPS+your hostname. Remote will not
pair unless it starts with PHILIPS.
LogicalChannel
802.15.4 channel number (1 byte hex) defaults to 19 other channels
than 19 do not work on my remote
usbi
USB bus and device number (2 integer decimal)
bind to a specific USB device, e.g. 003:002
Things that work using this driver.
- pairing
- reception of all keypresses except for the 'music' button
Things that do not work yet
- signal strength monitoring (via 'rf settings' in the remotes setup menu)
- displaying infos on the remote's display.
